Autowatch Ghost Installation
Autowatch Ghost is a revolutionary immobiliser system that protects against key-cloning, hacking and vehicle theft. It can lower your insurance premiums and you could be eligible for incentives.
Easy to use and discrete and simple to use, the Ghost immobiliser is built into the vehicle's ECU. This makes it impossible for the engine to start without a secret code.
TASSA Approved
If you want to protect your vehicle from being stolen through key cloning, you should purchase the TASSA certified Autowatch Ghost immobiliser system. It is the latest technology in car security technology and thwarts thieves in two ways. It can stop your car from beginning if your keys have been cloned and also stops you driving away if thieves have stolen your keys.
The next generation device is connected to your vehicle's data network CAN and a personalised PIN code is entered via the vehicles standard buttons on the dashboard or wheel. The Ghost then prevents the engine starting and can be programmed to a variety of different settings like Gear Change Blocking, Stall on Start or Lock Gearbox (vehicle dependent). It is completely undetectable and doesn't utilize radio frequency signals, so that it is not detected by RF scanners or a code grabber.
The Ghost is a small, weatherproof device and is completely sealed to allow it to be concealed in the vehicle or mounted on the dashboard where it is nearly impossible for thieves to locate. In contrast to other alarm and immobiliser devices on the market, this one is not a Thatcham Category approved product but is recognized by insurance companies as a reliable anti-theft system. It also comes with 5 years of warranty.
The TASSA verification process assures that any installation work performed on the Ghost will be done so by a qualified and experienced installer. This gives the insurer, the customer and police confidence in the quality of any installation carried out. It also guarantees that the installers follow the manufacturer's guidelines and install the product in a safe and correct manner. Installers who are members of TASSA have an unwavering dedication to excellence and making a real difference in the fight against crime.
Compatible with a broad range of vehicles
The Autowatch Ghost 2 immobiliser is an innovative device that protects your vehicle from key cloning. Its PIN code system is integrated into your car's ECU, making it more difficult for thieves to duplicate the keys or hack the vehicle's system. The device is also discrete and is able to be easily installed in various vehicles including minivans as well as sports cars. It's also weatherproof and small enough to hide away from view. This makes it harder for thieves to steal it.
The process of installing the Ghost is simple and doesn't require any additional wiring. It is compatible with a range of vehicles and utilizes the vehicle's CAN data networks to communicate with the vehicle. It can also be disabled or turned off from the vehicle's main screen. The device is also compatible with a range of mobile apps, making it easy for you to manage your vehicle's security remotely.
The Ghost could have issues after installation, despite its many benefits. These issues can result from a variety of reasons, such as faulty wiring or an incompatible mobile app. In these situations, contacting an expert installer is the best approach to resolve the problem.
Users also have difficulty entering the Ghost's disarming sequence. This is usually due to users not rehearsing or remembering the proper sequence. The manual of the device includes an emergency code which can be used in the event that such issues occur.
Discreet
Autowatch Ghost is an advanced and discrete security system that protects against theft of vehicles. It uses the vehicle's CAN data network to work and is completely invisible to thieves, making it a highly effective deterrent. It can also be triggered by security systems such as car alarms and can send real-time alerts to its owner. These features can aid the police in finding your vehicle in the event that it is stolen.
This system can be installed within a matter of minutes and is compatible with a majority of vehicles. It's a TASSA approved aftermarket device that works with vehicle trackers. Certain insurance companies recognise it. It's also tamper-proof, and quiet and therefore criminals won't in a position to hear it working. The Ghost immobiliser can also be programmed to require a PIN of up to twenty numbers. This makes it nearly impossible to guess.
Ghost is only available only in the Service/Valet Mode. This means that you won't accidentally give your PIN to anyone who needs to access the computer system of your vehicle, like a mechanic. The Ghost also comes with a five-year warranty.
The Autowatch Ghost is a revolutionary immobiliser that can stop key cloning as well as ECU hacking, and car theft. It's an aftermarket CAN bus device that's a great alternative for older and new vehicles. It's easy to install and works quietly, so it can be fitted in any vehicle without cutting wires. You can also change your pin easily to make sure that only you are aware of it. It is also undetectable because it does not utilize RF scanning technology, or code-grabbing technology.
Easy to use
Autowatch Ghost is an innovative and effective security system designed to stop vehicle theft by disabling the engine. It uses a personalised code created by the owner of the vehicle which must be entered prior to the car can begin. This advanced technology elevates the overall security of your vehicle and makes it a top option for many motorists. However, executing this installation procedure requires careful preparation and attention to detail. This includes ensuring compatibility, relying on expert knowledge in compliance with legal regulations, as well as understanding the Ghost II’s operational dynamics. The importance of these aspects will ensure a successful installation and the best performance.
Unlike conventional systems unlike conventional systems, the Ghost II is silent and cannot be detected by thieves. It is also compact and weatherproof, making it hard to break in. It is compatible with CAN Lenastark, CAN, and other vehicles. It can even be utilized in vehicles that require isolation of the battery for maintenance. The Ghost 2 has a Transport Mode which disables the device when your car is being rented or loaned.
Before starting the Ghost 2, you will need to enter a PIN code that is unique to you. Installers will create a default code, but it is advised to change it as soon a feasible to ensure your safety. The device is able to go into sleep mode in order to conserve battery power, but it will re-wake if it detects an engine management signal. This feature can be disabled by going to the Settings menu. It is advisable to only use the Ghost immobiliser when your vehicle is driven, and to always lock it before leaving it unattended.
Easy to install
The Autowatch Ghost II, an advanced security system, deters car thefts by disabling a vehicle's engine. It operates by using a number that is unique to the owner of the vehicle, which makes it a powerful deterrent. Installing this device requires careful attention to detail and careful preparation. By making sure that it is compatible, relying on professional expertise in compliance with legal regulations and thoroughly understanding the system's workings it is possible to ensure a smooth installation and derive the maximum benefit from this security device.
This unique CANbus-based immobiliser is simple to install and operates silently and therefore, criminals won't be able to hear it. It makes use of the CAN bus to connect with your vehicle and is compatible with a large range of vehicles. It is a real revolution in vehicle security. It also protects your car from key cloning, hacking and car theft, as it cannot start without the proper pin code. what is a ghost immobiliser is small and weatherproof, making it difficult for criminals to alter or locate.
You'll need to find the CAN High (CAN H) and the CAN Low (CAN L) Wires on your vehicle's wiring schematic before you can begin installing the Ghost Immobiliser. Then, connect the high CAN wire to the low and connect the CAN low to the ECU. These wires can be found under the dashboard or near the engine.
It is recommended to employ an installer who is reputable and certified for the installation of Ghost immobiliser. This way, you will be certain that the system is properly installed and won't interfere with the functionality of your vehicle. Moreover, the installer will be able advise you on how to use the new device effectively.